Figure 3 Exit Module Harness Connections
9.
Lift the Exit Module from the chassis.
Replacement
Transfer the Front Exit Module Harness to the replacement part, and Perform ADJ 2.5.1 after
replacing the Exit Module.
Initial Issue
Phaser 8510/8560MFP Multifunction Product
REP 3.0.14 System Stabilizer
Parts List on PL 3.0
Removal
Remove the 2 screws that secure the System Stabilizer to the chassis.
Figure 1 Removing the System Stabilizer
10/2006
4-43
Repairs and Adjustments
REP 3.0.7, REP 3.0.14