Rep 1.0.29 Document Cover Hinges; Rep 2.0.1 Ink Loader Assembly - Xerox Phaser 8560MFP Service Documentation

REP 1.0.29 Document Cover Hinges

Parts List on PL 1.0
Removal
1. Remove the Document Cover (REP 1.0.28).
2. Remove the 4 (plastic, T-20) screws that secure each hinge to the cover.
Figure 1 Removing the Document Cover Hinges
Repairs and Adjustments
REP 1.0.29, REP 2.0.1

REP 2.0.1 Ink Loader Assembly

Parts List on PL 2.0
Removal
Allow adequate time for the Ink Melters to cool before servicing the Ink Loader.
1. Remove the Scanner Assembly with attached DADF (REP 1.0.11).
2. Remove the Right Side Cover (REP 1.0.21).
3. Remove the Left Side Cover (REP 1.0.7).
4. Raise the Media Path Elevator to the up position.
Figure 1 Raising the Media Path Elevator
5. Press the left and right sides of the assembly inward, then lift to access the 2 connectors.
10/2006
4-12
CAUTION
Phaser 8510/8560MFP Multifunction Product
Initial Issue