Xerox Phaser 8560MFP Service Documentation page 15

Side View with Interface Connections
Figure 3 Side View with Interface Connections
1. Drum Maintenance Kit
2. Waste Tray
3. AC Power Cord Connection
4. Power Switch
5. Scanner Cable Connection
6. USB Connection
7. Ethernet Connection
8. Configuration Card
9. RJ-11 Fax Modem Connection
Back View - Electronics Module
The system's main electronics and power supply are enclosed in a metal case called the Elec-
tronics Module. The rear panel allows access to the electronics module, RAM, and NVRAM
chips. The system's Hard Drive is mounted on the rear panel.
NOTE: When replacing the electronics module, transfer these components to the new module.
• RAM
• Configuration Card
• NVRAM Device
• Hard Drive or Flash Disk
Initial Issue
Phaser 8510/8560MFP Multifunction Product
1. RAM Connectors
2. NVRAM Device
3. Hard Drive
4. Printer Stabilizer
10/2006
xv
Figure 4 Back View
Parts of the Product
Introduction