Rep 4.0.15 Electronics Module Cooling Fan; Rep 4.0.16 Head Tilt Gear - Xerox Phaser 8560MFP Service Documentation

REP 4.0.15 Electronics Module Cooling Fan

Parts List on PL 4.0
Removal
1. Remove the Scanner Assembly and attached DADF (REP 1.0.11).
2. Remove the Output Tray (REP 1.0.6).
3. Remove the Left Side Cover (REP 1.0.7).
4. Disconnect the fan (P/J207) from the Left Side Harness.
5. Remove 2 (plastic, T-20) screws that secure the fan to the chassis.
Figure 1 Removing the Electronics Module Cooling Fan
Repairs and Adjustments
REP 4.0.15, REP 4.0.16

REP 4.0.16 Head Tilt Gear

Parts List on PL 4.0
Removal
1. Remove the Printhead (REP 2.0.2).
2. Remove the KL-Clip from the left side.
Figure 1 Head Tile Gear KL-Clip Location
3. Remove the Waste Tray.
4. Remove the X-Axis Spring (REP 2.0.21).
5. Remove 1 (metal, T-20) screw that secures the X-Axis Spring Retainer to the chassis.
10/2006
4-54
Initial Issue
Phaser 8510/8560MFP Multifunction Product