Xerox Phaser 8560MFP Service Documentation page 140

Figure 2 Lowering the Printhead Wiper Blade
9. Hold the Printhead away from the Drum and push down on the left and right Printhead
Restraint Arms to release the Printhead Tilt Spring tension.
Repairs and Adjustments
REP 2.0.8
Figure 3 Releasing the Printhead Tilt Spring.
10. Pull the X-Axis Bias Spring and Hook out slightly, and then rotate downward to allow it to
rest in detents provided on the frame. See Figure 4.
10/2006
4-26
Initial Issue
Phaser 8510/8560MFP Multifunction Product