Rep 1.0.19 Duplex Automatic Document Feeder Hinges; Rep 1.0.20 Rear Cover - Xerox Phaser 8560MFP Service Documentation

REP 1.0.19 Duplex Automatic Document Feeder Hinges

Parts List on PL 1.0
Removal
1. Remove the DADF (REP 1.0.11).
2. Remove the 4 (plastic, T-20) screws that secure each hinge to the DADF.
Figure 1 Removing the DADF Hinges
Replacement
NOTE: Failure to adequately secure the DADF cable connection to the Scanner Assembly can
result in sporadic DADF errors. Seat the DADF connector completely using the connector's two
thumbscrews.
Repairs and Adjustments
REP 1.0.19, REP 1.0.20

REP 1.0.20 Rear Cover

Parts List on PL 1.0
Removal
1. Remove the Right Side Cover (REP 1.0.21).
2. Remove the Left Side Cover (REP 1.0.7).
3. Release the Tab that secures the Rear Cover.
Figure 1 Removing the Rear Cover
10/2006
4-10
Initial Issue
Phaser 8510/8560MFP Multifunction Product