Left Crankcase Bearing Replacement - Honda TRX450R Service Manual

CRANKCASE/TRANSMISSION/CRANKSHAFT/BALANCER ('04 - '05)
LEFT CRANKCASE BEARING
REPLACEMENT
Before removing the bearings, heat the crankcase
evenly using a heat gun.
Remove the countershaft collar.
Remove the left countershaft oil seal.
Remove the screws and set plates.
Drive the countershaft bearing out of the left crank-
case.
COUNTERSHAFT OIL SEAL
COUNTERSHAFT BEARING
Remove the mainshaft bearing using the special
tools.
TOOLS:
Remover handle
Bearing remover, 17 mm
Remover weight
07936-3710100
07936-3710300
07741-0010201 or
07936-3710200 or
07936-371020A
(U.S.A. only)
Remove the balancer shaft oil seal.
Remove the balancer shaft needle bearing using the
special tools.
TOOLS:
Remover handle 07936-3710100
Bearing remover, 20 mm 07936-3710600
Remover weight 07741-0010201 or
07936-3710200 or
07936-371020A
(U.S.A. only)
B E
A R | N G R E M O V E R
MAINSHAFT BEARING *
i REMOVER WEIGHT!
BALANCER SHAFT NEEDLE BEARING*'
15-21