CLUTCH/STARTER CLUTCH/KICK STARTER/GEARSHIFT LINKAGE (After '05)
Apply oil to the kickstarter spindle bearing area.
Install the kickstarter assembly into the crankcase.
Hook the kickstarter return spring end to the hole in
the crankcase as shown.
Install the following:
-
clutch assembly (page 14-11)
-
right crankcase cover (page 14-28)
GEARSHIFT LINKAGE
REMOVAL
Remove the following:
-
bolt and gearshift pedal
-
right crankcase cover (page 14-5)
-
clutch assembly (page 14-6)
-
right mud guard and foot peg (page 3-3)
-
gearshift spindle and thrust washer
KICKSTARTER ASSEMBLY
RETURN SPRING
14-24