CLUTCH/STARTER CLUTCH/KICK STARTER/GEARSHIFT LINKAGE (After '05)
Install the snap ring securely.
ONE-WAY CLUTCH
SNAP RING
CLUTCH OUTER
Install the starter driven gear into the clutch outer
C T A D T
r
D
. .,
i i -
ol An
I
tn
while turning it counterclockwise.
CLUTCH OUTER
Install the needle bearing.
Check that the starter driven gear turns counter-
clockwise smoothly and does not turn clockwise.
NEEDLE BEARING
INSTALLATION
Install the primary Install the starter clutch and primary drive gear
drive gear with the while aligning its wide cut-out in the splines with
punch mark facing the punch mark on the mainshaft.
out.
14-19