Ignition Coil Removal/Installation - Honda TRX450R Service Manual

ELECTRICAL ('04 - '05)
Read the Connect a timing light to the spark plug wire.
manufacturer's
instructions for
timing light IDLE SPEED: 1,600 ± 100 rpm
operation.
The ignition timing is correct if the "F" mark on the
flywheel aligns with the index mark on the left
crankcase cover.
- — - _ _ _ _ INDEX MARK
"F" MARK
Coat a new O-ring with oil and install it onto the tim-
ing hole cap.
Apply grease to the timing hole cap threads and
seating surface.
Install the timing hole cap and tighten it.
TORQUE: 9.8 N m (1.0 kgf-m, 7 Ibf-ft)
IGNITION COIL
REMOVAL/INSTALLATION
Remove the right front fender (page 3-6).
Remove the spark plug cap from the spark plug.
Disconnect the primary wire connector.
Remove the bolts, ground terminal and ignition coil.
Installation is in the reverse order of removal.
IGNITION COIL ^ V PRIMARY WIRE
20-15