Honda TRX450R Service Manual page 426

HYDRAULIC BRAKE
Install the pad spring as shown.
PAD SPRING
Install new pin boots A and B into the caliper
bracket.
Apply silicone grease to the sliding surface of cali-
per pin A and install it into pin boot A.
Install the brake pads onto the caliper bracket.
CALIPER BRACKET
Apply silicone grease to the sliding surface of cali- ^.
per pin B and install the caliper body onto the ^ J f i g i j
bracket.
Install the caliper pin bolt and tighten it.
TORQUE: 23 N m (2.3 kgf-m, 17 Ibfft)
Connect the brake hose with the oil bolt and new
sealing washers.
Rest the hose joint onto the stopper of the caliper
body and tighten the oil bolt.
TORQUE: 34 N m (3.5 kgf m, 25 Ibfft)
19-26