Rear Brake Caliper Disassembly - Honda TRX450R Service Manual

HYDRAULIC BRAKE
Connect the brake hose with the oil bolt and new
sealing washers.
Rest the hose joint onto the stopper of the master
cylinder and tighten the oil bolt.
TORQUE: 34 N-m (3.5 kgf m, 25 Ibf ft)
Install the right mud guard (page 3-4).
Fill and bleed the rear brake hydraulic system (page
19-7).
REAR BRAKE CALIPER
DISASSEMBLY
Drain the brake fluid from the rear brake hydraulic
system (page 19-5).
Loosen the lock nut, and remove the adjusting bolt
and brake arm.
Disconnect the parking brake cable from the brake
arm and remove it from the cable holder.
Remove the two bolts and parking brake base.
Remove the O-ring.
Disconnect the brake hose from the brake caliper by
removing the oil bolt and sealing washer.
O-RING • PARKING BRAKE BASE
19-22