Indicators - Honda TRX450R Service Manual

LIGHTS/SWITCHES (After '05)
Se careful not to let
the screw fall into
the steering shaft.
Take care not to
drop the screw.
Do not interchange
the neutral and
reverse indicator
lenses.
INDICATORS
Remove the following:
- fuel fill cap breather hose (from the cover)
- indicator lenses (by prying them, using a small
flat-blade screwdriver)
- cover attaching bolt
- handlebar cover (by releasing its ends off the
handlebar)
- bulb sockets (from the cover)
Carefully turn the bulb socket inside out and pull the
bulb out of the socket.
Install a new bulb into the socket.
Install the bulb sockets into the handlebar cover in
the direction as shown.
Install the cover onto the handlebar. Install the
cover screw and tighten it securely.
Install the indicator lenses into the socket properly.
Install the breather hose into the cover.
HANDLEBAR
COVER
BULB
(NEUTRAL)
(TRX450ER
only)
BOLT
LENSES
SOCKETS
SOCKET (NEUTRAL)
(TRX450ER only)
SOCKET (COOLANT TEMPERATURE)
REMOVAL/INSTALLATION
Remove both front fenders (page 3-6).
Disconnect the headlight 3P connector and remove
the clamp.
CLAMP
HEADLIGHT 3P CONNECTOR
24-5