Honda TRX450R Service Manual page 337

CRANKCASE/TRANSMISSION/CRANKSHAFT/BALANCER (After '05)
LEFT CRANKCASE BEARING
REPLACEMENT
Remove the crankshaft oil seal.
Remove the set plate bolts, washers and set plates
from the left crankcase.
Drive the crankshaft bearing out of the left crank-
case.
Remove the countershaft and balancer shaft oil
s e a l s
- -, COUNTERSHAFT
Remove the torx screws and countershaft bearing
set plates.
Drive the countershaft bearing out of the left crank-
case.
Remove the snap ring from left crankcase.
CRANKSHAFT
BEARING
BOLTS/WASHERS
BALANCER SHAFT
* m TORX SCREWS/SET PLATES
COUNTERSHAFTBEARRING
BALANCER SHAFT BEARING
16-20