Balancer Gear/Balancer Installation - Honda TRX450R Service Manual

CRANKCASE/TRANSMISSION/CRANKSHAFT/BALANCER ('04 - '05)
INSTALLATION
Apply molybdenum oil solution to the balancer
shaft ball bearing and needle bearing.
Apply grease to the balancer shaft oil seal lip.
Install the balancer shaft into the crankcase at the
angle as shown.
Install the sunk key into the key groove in the bal-
ancer shaft.
Install the balancer driven gear onto the balancer
shaft by aligning the key groove with the key.
Install the balancer drive gear onto the crankshaft
by aligning the wide groove with the flat tooth
(punch mark).
BALANCER DRIVEN GEAR
BALANCER DRIVE GEAR
15-9