Honda TRX450R Service Manual page 342

CRANKCASE/TRANSMISSION/CRANKSHAFT/BALANCER (After 05)
Drive in new
bearings squarely
with the marking
side facing toward
the inside of the
crankcase.
Drive in new bearings into the right crankcase using
the special tools.
TOOLS:
Crankshaft bearing:
Driver
Attachment, 72 x 75 mm
Pilot 30 mm
Countershaft bearing:
Driver
Attachment, 42 x 47 mm
Pilot, 17 mm
Mainshaft bearing:
Driver
Attachment, 52 x 55 mm
Pilot, 25 mm
Shift drum bearing:
Driver
Attachment, 42 x 47 mm
Pilot, 25 mm
Balancer shaft bearing:
Driver
Attachment, 42 x 47 mm
Pilot, 17 mm
07749-0010000
07746-0010600
07746-0040700
07749-0010000
07746-0010300
07746-0040400
07749-0010000
07746-0010400
07746-0040600
07749-0010000
07746-0010300
07746-0040600
07749-0010000
07746-0010300
07746-0040400
Apply locking agent to the set plate bolt threads.
Install the balancer shaft bearing set plates and
tighten the bolts to the specified torque.
TORQUE: 12 N m (1.2 kgf m, 9 Ibf ft)
Apply locking agent to the set plate bolt threads.
Install the mainshaft and shift drum bearing set
plates, and tighten the bolts to the specified torque.
TORQUE: 12 N m (1.2 kgf m, 9 Ibf ft)
PILOT
BOLTS/SET PLATES
f»
I SHIFT DRUM
BEARING
COUNTERSHAFT
BEARING
16-24