Service Rules; Model Identification - Honda TRX450R Service Manual

2004-2009
Hide thumbs Also See for TRX450R:
Table of Contents

Advertisement

GENERAL INFORMATION
SERVICE RULES
1. Use genuine Honda or Honda-recommended parts and lubricants or their equivalents. Parts that do not meet Honda's
design specifications may cause damage to the vehicle.
2. Use the special tools designed for this product to avoid damage and incorrect assembly.
3. Use only metric tools when servicing the vehicle. Metric bolts, nuts and screws are not interchangeable with English
fasteners.
4. Install new gaskets, O-rings, cotter pins, and lock plates when reassembling.
5. When tightening bolts or nuts, begin with the larger diameter or inner bolt first. Then tighten to the specified torque
diagonally in incremental steps unless a particular sequence is specified.
6. Clean parts in cleaning solvent upon disassembly. Lubricate any sliding surfaces before reassembly.
7. After reassembly, check all parts for proper installation and operation.
8. Route all electrical wires as shown in the Cable and Harness Routing (page 1-24).
MODEL IDENTIFICATION
'04 - '05 model shown; After '05 similar
The model identification label is located on the left front frame pipe.
MODEL IDENTIFICATION LABEL
1-2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trx450er

Table of Contents