Spark Arrester; Nuts, Bolts, Fasteners- •4-31 - Honda TRX450R Service Manual

MAINTENANCE
Raise the rear wheels off the ground and support
the vehicle securely.
Check for worn swingarm bearings by grabbing the
swingarm and attempting to move it to side to side.
Replace the bearings if any looseness is noted (page
18-7).
SPARK ARRESTER
Remove the three bolts, muffler tail cover and the
spark arrester with the gasket.
Use a brush to remove carbon deposits from the
screen mesh, being careful not to damage the
screen mesh.
The screen mesh must be free of breaks and holes.
Replace the spark arrester if necessary.
Install a new gasket onto the spark arrester.
Install the spark arrester and muffler tail cover, and
tighten the bolts securely.
SPARK ARRESTER GASKET
BOLTS
TAIL COVER
NUTS, BOLTS, FASTENERS
Check that all chassis nuts and bolts are tightened to
their correct torque values (page 1-16).
Check that all cotter pins, safety clips, hose clamps
and cable stays are in place and properly secured.
4-31