REAR WHEEL/SUSPENSION
-
two bolts, collars and drive chain guard
Turn the rear axle bearing holder to obtain maxi-
mum drive chain slack (page 4-22).
Remove the drive chain from the driven sprocket.
Remove the cotter pin from the left wheel hub nut.
Loosen the hub nut.
Remove the wheel nuts and left rear wheel.
Remove the hub nut and left wheel hub.
Remove the rear axle from the axle bearing holder
in the swingarm by driving it from the right side
with a rubber mallet.
Remove the following:
-
O-ring
-
four nuts, washers, bolts and driven sprocket
f»—I
18-9