Steering Shaft Removal - Honda TRX450R Service Manual

FRONT WHEEL/SUSPENSION/STEERING
STEERING SHAFT
REMOVAL
Remove the top cover (page 3-5).
Release the cables and wires from the cable guides.
Remove the bolt and brake hose clamp from the
steering shaft holder.
BRAKE HOSE CLAMP
CABLE GUIDES
Do not twist or Remove the handlebar lower holder nuts, washers
bend the brake and the handlebar assembly from the steering shaft.
hose and pipe.
Remove the two bolts and steering shaft holder.
Remove the cotter pins from the tie-rod ball joint
studs.
Remove the ball joint nuts while holding the joint
stud flat surfaces with an open end wrench.
Remove the tie-rods from the steering shaft.
STEERING SHAFT HOLDER
17-24