Honda TRX450R Service Manual page 221

CYLINDER HEAD/VALVE
The hanger plates
are identified by the
marks;
-L: left side
-R: right side
Install the following:
- engine hanger plates with the two bolts
- engine hanger bolt (from the left side), spacers
and nut
- hose clip ('04 - ' 0 5 model only)
The identified marks of after '05 model are inside of
the hanger plates.
Tighten the fasteners in order as follows.
TORQUE:
Hanger plate bolt: 26 N m (2.7 kgf-m, 20 Ibfft)
Engine hanger nut: 54 N m (5.5 kgf m, 40 Ibfft)
Install the following:
- engine coolant temperature (ECT) sensor
('04 - '05: page 20-24, After '05: page 24-11).
- ECT sensor connector
- thermostat (page 9-9)
- carburetor
('04 - '05: page 7-21, After '05: page 8-22)
- exhaust system (page 3-12)
- camshaft holder assembly (page 11-29)
SPACER
CONNECTOR • ECT SENSOR
11-26