Honda TRX450R Service Manual page 465

BATTERY/CHARGING SYSTEM (After '05)
Install the flywheel onto the crankshaft by aligning *T.
V
\A/UPPI
the key way with the woodruff key.
Apply oil to the flywheel nut threads and seating
surface.
Install the washer and flywheel nut.
Hold the flywheel using the special tool and tighten
the flywheel nut to the specified.
TOOL:
Flywheel holder 07725-0040000 or
equivalent
commercially
available
TORQUE: 64 N m (6.5 kgf-m, 47 Ibf-ft)
Install the left crankcase cover (page 21-13).
LEFT CRANKCASE COVER
INSTALLATION
Check the oil seal in the left crankcase cover for
wear or damage.
Remove the snap ring and replace the oil seal with a
new one if necessary.
Apply oil to the oil seal lip.
Install the dowel pins and new gasket.
Install the left crankcase cover, cable holder and F^ABLE
bolts. ' - ^ _
Connect the breather hose.
DOWEL PINS
am
BREATHER HOSE
LEFT CRANKCASE COVER
BOLTS
21-13