LUBRICATION SYSTEM (After '05)
Clean the oil strainer screen.
Check the oil strainer screen for damage.
INSTALLATION
Install the grommet onto the oil strainer pipe.
Coat a new seal ring with oil and install it onto the
oil pipe.
Install the oil strainer onto the left crankcase.
Install the set plate and tighten the bolt securely.
Install the guide plate by aligning the hole with the
boss and tighten the bolt securely.
Install the drive pin into the oil pump shaft.
Install the oil pump driven gear aligning its cut-out
with the drive pin.
STRAINER SCREEN
6-6