Honda TRX450R Service Manual page 315

CRANKCASE/TRANSMISSION/CRANKSHAFT/BALANCER ( 0 4 - 05)
Drive new bearings into the right crankcase with the
markings facing up, using the special tools.
DRIVER
TOOLS:
Crankshaft bearing:
Driver
Attachment, 62 x 68 mm
Pilot, 30 mm
Mainshaft bearing:
Driver
Attachment, 52 x 55 mm
Pilot, 25 mm
Countershaft bearing:
Driver
Attachment, 42 x 47 mm
Pilot, 17 mm
Shift drum bearing:
Driver
Attachment, 42 x 47 mm
Pilot, 25 mm
Balancer shaft bearing:
Driver
Attachment, 42 x 47 mm
Pilot, 17 m m
07749-0010000
07746-0010500
07746-0040700
07749-0010000
07746-0010400
07746-0040600
07749-0010000
07746-0010300
07746-0040400
07749-0010000
07746-0010300
07746-0040600
07749-0010000
07746-0010300
07746-0040400
MAINSHAFT COUNTERSHAFT
BEARING n BEARING
Apply locking agent to the set plate bolt threads.
Install the mainshaft and shift drum bearing set
plates, and tighten the bolts.
TORQUE: 12 N m (1.2 kgf-m, 9 Ibf-ft)
Apply locking agent to the set plate bolt threads.
Install the balancer shaft bearing set plates and
tighten the bolts.
TORQUE: 12 N-m (1.2 kgf-m, 9 Ibf-ft)
BALANCER
j SHAFT
' BEARING
15-24