Clutch Switch (Trx450Er Only) - Honda TRX450R Service Manual

LIGHTS/SWITCHES (After '05)
See page 24-8 for Check for continuity between the switch side con-
clutch switch nector terminals in each switch position. DIMMER
inspection. Continuity should exist between the color coded
wires as shown below:
ENGINE STOP SWITCH
LIGHTTING
COLOR
O
Green
o-
Black/white
STARTER
ENGINE STOP
LIGHTING SWITCH/DIMMER SWITCH
COLOR
Black
Brown COLOR
10
(N)
Blue White
STARTER SWITCH
COLOR
Free
Push
Black Yellow/red
-o
CLUTCH SWITCH (TRX450ER only)
REMOVAL/INSTALLATION
Remove the dust cover off of the clutch lever
bracket.
Remove the screw and retainer.
Disconnect the connectors to remove the clutch
switch.
Apply locking agent to the threads of the clutch
switch retainer screw.
Connect the clutch switch to the connectors and
install it into the lever bracket.
Secure the switch with the retainer and screw.
Install the dust cover over the lever bracket.
CLUTCH
SWITCH
24-8