LUBRICATION SYSTEM (After '05)
Install a new snap ring onto the oil pump shaft.
Install the balancer (page 16-8).
OIL PUMP DRIVEN GEAR
PRESSURE RELIEF VALVE
REMOVAL/INSPECTION
Remove the left crankcase cover (page 21-11).
Remove the snap ring and pressure relief valve
from the left crankcase cover.
Check the pressure relief valve for damage or clogs.
RELIEF VALVE
INSTALLATION
Apply oil to a new O-ring and install it onto the pres-
sure relief valve.
Install the pressure relief valve into the left crank-
case cover.
After installing a Install the snap ring securely.
snap ring, always ,
„
h
,
ft c r a n k c a s e c o v e r ( p a g e 2 1
.
1 3
) .
rotate it in its
groove to be sure it
is fully seated.
6-7