Honda TRX450R Service Manual page 274

CLUTCH/STARTER CLUTCH/KICK STARTER/GEARSHIFT LINKAGE (After '05)
Hold the clutch center using the special tool and
tighten the lock nut.
TOOL:
Clutch center holder 07724-0050002 or
07724-0050001 or
equivalent commercially
available in U.S.A.
TORQUE: 108 N-m (11.0 kgf m, 80 Ibf-ft)
Bend the lock washer tabs against the clutch center
lock nut.
Install the spring seat.
Install the judder spring with the concaved side fac-
ing out.
Coat the clutch discs with transmission oil.
Install the clutch disc B.
Install the seven clutch plate and six clutch discs A
alternately, starting with a plate.
CLUTCH CENTER HOLDER
CLUTCH PLATES
14-12