Lights/Switches Service Information; Lights/Switches Specifications; Lights/Switches Torque Values - Honda TRX450R Service Manual

LIGHTS/SWITCHES (After '05)
SERVICE INFORMATION
GENERAL
• All plastic connectors have locking tabs that must be released before disconnecting, and must be aligned when recon-
necting.
• To isolate an electrical failure, check the continuity of the electrical path through the part. A continuity check can usually
be made without removing the part from the vehicle. Simply disconnect the connectors and connect a continuity tester
to the terminals or connections.
• Check the battery condition before performing any inspection that requires proper battery voltage (TRX450ER only).
• The following color codes are used throughout this section.
Bu
Bl:
Br:
:Blue
Black
Brown
G: Green
Gr: Gray
Lb: Light Blue
Lg: Light Green
0: Orange
P: Pink
R:Red
W: White
Y: Yellow
SPECIFICATIONS
ITEM
Bulbs
Fuse
Ect senser
resistancee
Headlight (High/low beam)
Brake/taillight
Neutral indicator
Coolant temperature indicator
Main fuse (TRX450ER)
at80°C(176°F)
at 120°C (248°F)
SPECIFICATIONS
12 V-30/30 W
LED
1 2 V - 3 W
1 2 V - 3 . 4 W
15A
47.5 - 56.8 Q.
14.9 -17.3 Q
TORQUE VALUES
Neutral switch (TRX450ER only)
Engine coolant temperature (ECT)
senser
12N-m(1.2kgfm,9lbf-ft)
9.8N-m(1.0kgf-m,7lbfft)
24-3