Right Crankcase Cover Installation - Honda TRX450R Service Manual

CLUTCH/STARTER CLUTCH/KICK STARTER/GEARSHIFT LINKAGE (After 05)
RIGHT CRANKCASE COVER
INSTALLATION
Install the water joint pipe, a new O-ring, dowel pins
and a new gasket.
TRX450R only: Apply grease to the kickstarter spindle oil seal lip.
Apply oil to the kickstarter first idle gear bearing.
Install the right crankcase cover while engaging the I RIGHT CRANKCASE COVER
water pump shaft with the balancer shaft. ^ ^
Install the wire clamp, hose clamp and right crank-
case bolts, and tighten the bolts in a crisscross pat-
tern in 2 or 3 steps.
TRX450R only: Install the kickstarter pedal onto the kickstarter spin-
dle by aligning the punch marks.
A KICKSTARTER PEDAL
SPINDLE PUNCH MARKS
14-28