LEFT CRANKCASE COVER
INSTALLATION
Install the starter reduction gear and shaft.
Coat
new O-ring with oil and install it into the
a
starter motor groove.
Install the dowel pins and a new gasket
Install the left crankcase cover, being careful not to
pinch the neutral switch wire.
Install the nut and seven bolts, and tighten them
securely.
Install the gearshift pedal onto the gearshift spindle,
aligning the punch marks on the pedal and spindle.
Install the gearshift pedal pinch bolt and tighten it.
10-4
14 Ibf4t)
. . .