Tie-Rod Installation - Honda TRX450R Service Manual

FRONT WHEEL/SUSPENSION/STEERING
INSTALLATION
Install the tie-rod onto the steering shaft and
knuckle with the flat side of the rod toward the
knuckle.
Install and tighten the joint nuts while holding the
ball joint stud flats with an open end wrench.
TORQUE: 44 N-m (4.5 kgfm, 33 Ibfft)
Install new cotter pins.
Install the front wheel (page 17-11).
Adjust the toe and ball joint angle (page 4-33).
17-31