CLUTCH/STARTER CLUTCH/KICK STARTER/GEARSHIFT LINKAGE (After '05)
Coat a new O-ring with oil and install it into the f
clutch cover groove.
Install the clutch cover, and tighten the six bolts
securely.
Install the brake pedal (page 19-28).
Fill the crankcase with the recommended transmis-
sion oil (page 4-18).
CLUTCH LIFTER ARM
REMOVAL
Remove the clutch lifter rod (page 14-6).
Remove the bolt and parking brake cable clamp
from the stay.
Remove the mounting bolts and clutch cable stay.
Remove the cable clip.
Disconnect the clutch cable from the clutch lifter
arm.
Remove the clutch lifter arm.
Remove the oil seal.
INSPECTION
Check the needle bearing, oil seal for wear or dam-
age and replace them if necessary.
PARKING BRAKE CABLE
CLUTCH CABLE STAY BOLTS
14-14