CLUTCH/STARTER CLUTCH/KICK STARTER/GEARSHIFT LINKAGE (After '05)
ASSEMBLY
Apply molybdenum oil solution to the sliding sur-
_ = z r
face of the clutch outer guide and install it onto the
' H
mainshaft.
•
Apply transmission oil to the needle bearing and
install it onto the clutch outer guide.
Install the clutch outer and thrust washer.
Install the right crankcase cover (page 14-28).
Install the clutch center onto the mainshaft.
Install a new lock washer by aligning the grooves
with the ribs of the clutch center.
Apply transmission oil to the threads and sealing
surface of the clutch center lock nut.
Install the thrust washer and lock nut.
14-11