Power-Down Procedure; System Warnings/Errors - Christie Roadie HD+35K Setup Manual

Section 3: Operation
3.4

Power-down Procedure

NOTE: Describes a manual shutdown only. May be automated.
1. Do one of the following to turn the projection head and lamp off:
• Press P
OWER
• Press and hold P
• Press P
OWER
NOTE: Continue running all fans, including the heat extractor to cool the lamp for approximately 10 minutes.
2. Turn the breakers/power switches OFF on both the projector head and ballast.

3.4.1 System Warnings/Errors

When the projector encounters a system malfunction, either a System Warning message or a System Error
message may appear. Both types of messages are accompanied by a numerical error code on the "Status" LED
and a related text message in the LCD Status Display window. A system malfunction can be cleared by
pressing E
XIT twice from the presentation level, but may indicate the need for service by a Christie accredited
service technician.
NOTE: System messages appear on-screen only if Display Error Messages has been set to "Screen" or "All".
For more information, see the Roadie HD+35K User Manual (P/N: 020-100340-XX).
3-6
twice quickly
OWER
+ D A
OWN RROW
Make sure to wait for the fans to cool completely.
Roadie HD+35K Setup Guide
020-100394-06 Rev. 1 (10-2013)