Show Classofservice Ip-Precedence-Mapping; Show Classofservice Ip-Dscp-Mapping - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

show classofservice ip-precedence-mapping

This command displays the current IP Precedence mapping to internal traffic classes for a specific
interface. The unit/slot/port parameter is optional and is only valid on platforms that support
independent per-port class of service mappings. If specified, the IP Precedence mapping table of
the interface is displayed. If omitted, the most recent global configuration settings are displayed.
Format
show classofservice ip-precedence-mapping [<unit/slot/port>]
Mode Privileged EXEC
The following information is repeated for each user priority.
Term Definition
IP Precedence The IP Precedence value.
Traffic Class The traffic class internal queue identifier to which the IP Precedence value is mapped.

show classofservice ip-dscp-mapping

This command displays the current IP DSCP mapping to internal traffic classes for the global
configuration settings.
Format
show classofservice ip-dscp-mapping
Mode Privileged EXEC
The following information is repeated for each user priority.
Term Definition
IP DSCP The IP DSCP value.
Traffic Class The traffic class internal queue identifier to which the IP DSCP value is mapped.
Quality of Service (QoS) Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
5-6