Emergencymode; Enablecclog; Execute - Symbol WS5000 Series System Reference Manual

Example
SM-WS5000> directory
Date & Time
Mar 9 23:25
Mar 9 20:42
Mar 9 22:57
Mar 9 23:23
Mar 10 00:01
Mar 9 23:05
Mar 9 23:31
Mar 9 20:50
SM-WS5000>

9.2.14 emergencymode

Enables or disables the "Emergency" Switch Policy (ESP). This is a switch policy that can activated (enabled)
at any time in case of an emergency. When ESP is deactivated (disabled), the previous switch policy is
reactivated.
Define an Emergency switch Policy prior to enabling the Emergency Wireless Switch Policy. Create two or
more switch policies. An error message displays if less than two Switch Policies are available.
Syntax
emergencymode <enable/disable>
Parameters
Indicates whether to enable or disable the ESP.
enable/disable
Example
SM-WS5000> emergencyMode enable

9.2.15 enablecclog

This command is used to enable the CC log with dd.conf input file.
Syntax
enablecclog
Parameters
None
Example

9.2.16 execute

Executes the specified file. The command is used with specified optimization (patch file) files provided from
Symbol Technologies when a service upgrade is needed on the WS5000 Series Switch.
Bytes File Name
115219 WS5000Defaults_v2.1.0.0-017B.cfg
92004 WS5k_Auto_v2.1.0.0-015B_20060309.cfg
91824 WS5k_Auto_v2.1.0.0-016B_20060309.cfg
91818 WS5k_Auto_v2.1.0.0-017B_20060309.cfg
7531 cmd_template.sym
17020 kp.cfg
17023 pavan.cfg
34603 walmart_new.cfg
9-13
Service Mode CLI