8-70
WS 5000 Series System Reference
Example
WS5000.(Cfg)> securitypolicy
Available Security Policies:
1. Kerberos Default.
2. Default.
3. WEP40 Default.
4. WEP128 Default.
WS5000.(Cfg).SecurityPolicy>
8.5.45 sensor
Configuration (Cfg) Context
Display details of all Sensors and the Active AP 300's.You can also configure the default sensor configuration
in this context.See
8.47 Sensor Context
Syntax
sensor
Parameters
None.
Example
WS5000.(Cfg)> sensor
AP300's
-------
Sensor AP's
------------
1. 00:A0:F8:AA:BB:CC
WS5000.(Cfg).sensor>
8.5.46 set
Configuration (Cfg) Context
Displays the set commands for the different system component. There are a number of ways to invoke the set
command:
• When invoked within any system component context, set is used to configure the attributes for the
current context.
• When invoked within the system configuration context, it is used to set the information about various
system parameters.
Syntax
set <system_parameter>
Parameters
lists and describes the display_parameters in the set command:
Table 8.6
Table 8.6 set command's display_parameter Summary
Display Parameter
set arpcache
Configure Arp Cache
on page 252 for more details.
Description
Example
page 8-71