Cli Indexing - Symbol WS5000 Series System Reference Manual

Main Context Subcontext
Most of the switch configuration is performed in subcontexts of the Configuration context. For example, to drop
into the WLAN subcontext you type "
WS5000.(Cfg)> wlan
WS5000.(Cfg).wlan>
To bump up a context level, type "
WS5000.(Cfg).wlan> ..
ws5000.(Cfg)>
To jump to the system context use
WS5000.(Cfg).wlan> exit
ws5000>
Note You can't go "up and over" when navigating the CLI—constructions such as
".. context" or "../context" do not work.

8.1.2 CLI Indexing

You can use CLI indexing and navigate to a subcontext by typing the index number instead of the context name.
The following CLI contexts have the indexing functionality:
• AAA
• Access Port
• Access Control List
Subcontext
Route
Security Policy
Sensor
SNMP
Secure Shell
Secure Sockets Layer
Standby
Switch Policy
Telnet
Tunnel
User
WLAN
WME
WVPN
" from the Configuration context:
wlan
":
..
exit :
CLI Command Reference
Instance Context Subcontext
[SecurityPolicy_Name]
[Sensor_MAC]
[SPolicy_Name] Restricted
Channel
[GRE_Tunnel_Name]
[User_Name]
[WLAN_Name]
[WME_Name]
8-3