Ip Pools Instance; Add - Symbol WS5000 Series System Reference Manual

8-338
WS 5000 Series System Reference

8.70 ip pools Instance

WVPN Context
This context is an instance of WVPN context and is used to configure the DDNS settings.
summarizes the commands within this context. Common commands between multiple contexts are described
in further detail in the Common Commands
Table 8.75 ip_pools Instance Command Summary
Command
.. or end Terminate a current session and moves up a context, hierarchically.
exit Terminate a current session and returns to the "root" prompt.
? or help Get the command information.
logout or bye Close this session.
clear Clear the screen.

add

Add IP Address pools.
disable Disable DHCP WVPN Service.
enable Enable DHCP WVPN Service.
ip_pools Select a Pool to configure.
remove Remove IP Address pool.
set Configure WVPN DHCP.
show Display context specific attributes.
8.70.1 add
ip pools Instance
This command is used to add IP Address pools.
Syntax
add pool <pool_name> <begin IP> <end IP>
Parameters
pool_name The name of the IP pool that you want to add.
begin IP The starting/first IP address of the IP pool.
end IP The last/closing IP address of the IP pool.
Example
WS5000.(Cfg).wvpn.ip_pools> add pool TestPool 192.168.1.10 192.168.1.20
Adding ....
Status : Success.
WVPN IP Pools:
Description
Table 8.75
Ref.
page 8-7
page 8-7
page 8-7
page 8-8
page 8-8
page 8-338
page 8-339
page 8-339
page 8-340
page 8-341
page 8-342
page 8-342