Symbol WS5000 Series System Reference Manual page 717

Hide thumbs Also See for WS5000 Series:

Table of Contents

Images Needed

1. For Upgrade on Mantis DOM's

domfix.patch.sys.img

2. For Upgrade on 1.4 DOM's

WS5k_domfix.cfg

Procedure to Upgrade On the Mantis DOM

1. FTP/TFTP the domfix.patch.sys.img on the switch using copy tftp/ftp command.

2. In the Cfg mode, run patch command to install the Firmware Upgrade Patch

Cfg> patch domfix.patch.sys.img

3. This will check if the DOM firmware is up to date. If yes, it will just exit or else it will reboot the switch

and upgrade the DOM Firmware.

DOM Firmware Upgrade