Remove - Symbol WS5000 Series System Reference Manual

2. Configure the
DHCP Server Addres,Default Gateway,DNS Address,WINS Address and
Domain name mentioned in the above example using the set command
Syntax
set <cfg_parameter> <value>
Parameters
netmask The IP address of the network mask.
dhcpServer The IP address of the DHCP server.
dns The IP address of the DNS server.
defaultGateway The IP address of the default gateway.
wins The IP address of Wins.
domainName Domain name for the IP pool.
nodeType NETBIOS node type.
reuseTime Idle timeout to reuse addresses when addresses are exhausted.
Example
WS5000.(Cfg).wvpn.ip_pools.[1]> set dhcpServer 192.168.1.2
Configuring pool[1] information....
Status : Success.
WVPN IP Pools:
Name
Netmask
DHCP Server Address : 192.168.1.2
Default Gateway
DNS Address
WINS Address
Domain name
NETBIOS Node type
Reuse Address Time
Number of ranges
IP Ranges:
0) 198.162.1.10-198.162.1.20
WS5000.(Cfg).wvpn.ip_pools.[1]>

8.70.5 remove

ip pools Instance
This command is used to delete IP pools.
Syntax
remove pool <pool_name>
Parameters
pool_name The name of the IP pool that you want to remove.
: TestPool
: 255.255.255.0
: 0.0.0.0
: 0.0.0.0
: 0.0.0.0
:
: H-node
: 0 seconds
: 1
8-341
CLI Command Reference