8.62.1 allow
User Instance
Sets the list of subsystems that you can configure.
Syntax
allow <subsystem1> [<subsystem2>] [...]
Parameters
subsystemN
The subsystem that you can configure with one or more of the following possible values:
• all
• default
• system
• policy
• security
• SNMP
Example
WS5000.(Cfg).User.[Name]> allow system policy security
8.62.2 deny
User Instance
WS5000.(Cfg).User.[Name]> deny
Sets the list of subsystems that you cannot configure.
Syntax
deny <subsystem1> [<subsystem2>] [...]
Parameters
subsystemN
The subsystem that you cannot configure with one or more of the following possible
values:
• all
• default
• system
• policy
• security
• SNMP
Example
WS5000.(Cfg).User.[Name]> deny SNMP policy security
8.62.3 password
User Instance
Set the user password. You are prompted to provide a new password and then confirm the new password.
8-303
CLI Command Reference