CLI#aaaaaa
CLI#add aaauser4
CLI#aaaaaa
CLI#aaaaaa
CLI#..
#############################################################################
#Add a RADIUS Group
#############################################################################
CLI#group
CLI#add aaagroup
CLI#..
#############################################################################
# Add aaauser0 to this created group
#############################################################################
CLI#adduser aaauser0 aaagroup
CLI#..
CLI#..
#############################################################################
# Set this access policy for this Group to allow the WLAN
#############################################################################
CLI#policy
CLI#add wlan aaagroup aaawlan
CLI#..
#############################################################################
#Issue Save command to save these configurations
# Start the RADIUS server using "enable"
#############################################################################
CLI#save
CLI#enable
CLI#..
CLI#bye
To execute a
file, use the following commands:
.sym
•
install primary <.sym file name>
•
install standby <.sym file name>
To execute the
file, use the following command:
.cli
•
install runcli <.cli file name>
Configuring the WS5000 Series Switch Auto-
on a primary switch
on a standby switch
3-17