Fw Instance; Set - Symbol WS5000 Series System Reference Manual

8.35 FW Instance

Table 8.40 Firewall Instance Command Summary
Command
.. or end Terminate a current session and moves up a context, hierarchically.
exit Terminate a current session and returns to the "root" prompt.
? or help Get the command information.
logout or bye Close this session.
clear Clear the screen.
description Set description text.

set

Configure the LAN.
show Display context specific attributes.
8.35.1 set
FW Instance
This command is used to configure LAN parameters.
Syntax
set <config_parameter> <parameter_value>
Parameters
description Set the LAN description text.
ep Set the ethernet port.
np
addnat Add a NAT entry "remoteRealIp,localNatIp"
addrange Add range of NAT entries "remoteRealIp,localNatIp,num"
delnat Delete a NAT entry "remoteRealIp,localNatIp"
delrange Delete range of NAT entries "remoteRealIp,localNatIp,num"
allow Allow management traffic "http|https|telnet|ftp"
deny Deny management traffic "http|https|telnet|ftp"
Example
WS5000.(Cfg).Fw.[LAN1]> set np "Default Network Policy"
Configuring a LAN...
Status: Success.
Description
Set the network policy.
8-207
CLI Command Reference
Ref.
page 8-7
page 8-7
page 8-7
page 8-8
page 8-8
page 8-15
page 8-207
page 8-208