Symbol WS5000 Series System Reference Manual page 195

Table 6.7 Kerberos Authentication Settings (Continued)
Setting
Realm Name
Saving the Settings
Warning! A WS5000 model switch is not compatible to be configured as a
!
standbys for a WS5100 model switch.
Figure 6.63 WEP Encryption Settings
Note NIC must have DNS name configured.
The WEP Encryption Settings panel is where four pre-shared, manually fixed WEP keys are defined for
the Security Policy, as described in
Table 6.8 WEP Encryption Setting Descriptions
Setting
Key Size
Description
In addition to a Primary KDC server, a Kerberos Realm Name is required. The
Realm Name value should be all upper-case (since it is usually also the DNS
domain).
Note Only properly formed, full-qualified realm names are required.
The panel does not perform validation checking.
To save settings, click the Save button. The button is disabled until a Primary
KDC server and a Realm Name value is entered.
Table 6.8.
Description
To set the key size, choose the 40 bit Key or 128 bit Key radio button in the Key
Size box. If you're using KeyGuard, the key size is automatically set to 128 bits.
6-43
Configuring Policies