Host Instance; Set - Symbol WS5000 Series System Reference Manual

8-212
WS 5000 Series System Reference

8.37 Host Instance

The Host instance context lets you modify an entry in the host list.
Table 8.42 summarizes the commands within this context. Common commands between multiple contexts are
described in further detail in the
Table 8.42 Host Instance Context Command Summary
Command
.. or end Terminate a current session and moves up a context, hierarchically.
exit Terminate a current session and returns to the "root" prompt.
? or help Get the command information.
logout or bye Close this session.
clear Clear the screen.

set

Configure attributes of a particular host.
emergencymode Enable or disable Emergency mode.
show Display available classifier instance details.
8.37.1 set
Host Instance
Configures a host.
Syntax
set <attribute> <value>
Parameters
domain The host's domain name. The value of the domain should follow.
ip The host's IP address. The IP address value should follow.
Example
WS5000.(Cfg).Host.[NYhost]> show
Host Name
---------
NYhost
WS5000.(Cfg).Host.[NYhost]>
WS5000.(Cfg).Host.[NYhost]> set ip 111.222.111.30
Changing Host property...
Status: Success.
Host Name
---------
NYhost
Common Commands section.
Description
IP Address
----------
111.222.111.31
IP Address
----------
111.222.111.30
page 8-7
page 8-7
page 8-7
page 8-8
page 8-8
page 8-212
page 8-8
page 8-213
Domain
------
NYdomain
Domain
------
NYdomain
Ref.