Symbol WS5000 Series System Reference Manual page 219

Hide thumbs Also See for WS5000 Series:

Table of Contents

Figure 6.88 Creating a Wireless Switch Policy—Configuring Settings

Configure the Wireless Switch Policy settings per the descriptions in

Table 6.17 Wireless Switch Policy Settings

Switch Settings

Ethernet Port Policy

Select the appropriate country for the location of the wireless switch. The switch

will not adopt Access Ports until the country is set.

the None option is no longer available.

Note It is the responsibility of the switch owner to correctly set the

country. An incorrect country setting can cause the switch to use

illegal broadcast settings.

Check this box to designate the Wireless Switch Policy as the "Emergency"

Switch Policy (ESP). There can only be one ESP at a time (A Switch Policy that

previously assigned as the ESP will no longer act as such.)

After designating an Emergency Switch Policy, the 'E' icon in the lower left corner

of main window will turn red. You can turn the ESP on and off by clicking the icon.

When you turn the ESP off, the previously active Switch Policy will be re-

Each Switch Policy incorporates a (single) Ethernet Port Policy. To make this

assignment, you can select from among the existing Ethernet Port Policies, or you

can click Create... To create a new policy, see

Configuring Policies

Once a country is specified,

Creating an Ethernet Port Policy