Set - Symbol WS5000 Series System Reference Manual

Deleting mu 'symbol' from the KDC.
Status: Success.
List of active MUs (KDC user):No active Users available.
WS5000.(Cfg).KDC>
WS5000.(Cfg).KDC> remove
Deleting slave KDC....
Status: Success.
The system is configured as MASTER KDC.
Kerberos Realm
Interface
User count (Active + deleted)
Active users (MUs and WLANs)
Slave KDCs
----------
No entry available.
List of all active KDC users (MUs & WLANs): No active Users available.
WS5000.(Cfg).KDC>
WS5000.(Cfg).KDC> remove ntpserver 1
Deleting NTP Server....
Status: Success.
No NTP IP Entry exist, Time synchronization is Disabled
Time Server (NTP) details:
Primary NTP Server
First alternate NTP Server
Second alternate NTP Server
WS5000.(Cfg).KDC>

8.38.5 set

KDC Context
Use set to configure or create the KDC in the system or configure KDC access type.
Syntax
set master <realm> <if_num>
set slave <realm> <masters_name> <masters_ip> <if_num>
set clear
set ntpserver <server_no> <server_ip>
set access <cli/snmp> <enable/disable>
Parameters
master Configure the switch as master KDC.
slavekdc standby 1.1.1.1 symbol.com
: SYMBOL.LOCAL
: ethernet1
: 1
: 0
IP Address
----------
:
:
:
CLI Command Reference
Domain
------
8-217