Symbol WS5000 Series System Reference Manual page 721

The AP300 LED operates under the following circumstances:
• Quiet state.
• RF Transmit activity state.
• RF Receive activity state.
The maximum flash rate for each LED in the AP300 is ten times per second.
Table C.1 AP300 LED code
Current AP300 State
Quiet State
(AP300 is powered on with normal operation and no RF traffic)
RF Transmit activity state
(non-beacons)
AP300 LED Codes
LED Code
Both LEDs flash together (on/off) every five
seconds
Every non-beacon radio packet transmitted causes
the corresponding LED to flash (followed by off)
• Amber for the 802.11a radio
• Green for the 802.11b/g radio