Disable; Set - Symbol WS5000 Series System Reference Manual

8-292
WS 5000 Series System Reference

8.58.2 disable

Telnet Context
Disable the port/service on the switch to enable Telnet configuration via the CLI.
Syntax
disable
Parameters
None.
Example
WS5000.(Cfg).Telnet> disable
WARNING: This will disable all remote (CLI) access to the switch.
Do you want to continue (yes/no)? : n
WS5000.(Cfg).Telnet>

8.58.3 set

Telnet Context
WS5000.(Cfg).Telnet> set kdcConfig
Enables or disables on-board KDC configuration through telnet.
Syntax
set <attribute>
Parameters
attribute
kdcConfig <enable_flag> Enable or disable whether KDC configuration can be performed via Telnet connections.
Possible values are: enable, disable.
Example
WS5000.(Cfg).Telnet> set kdcconfig enable
Setting KDC configuration rights...
Status : Success.
Configuration Access restriction details:
Telnet access (CLI)
System access via SNMP
KDC configuration over remote console
KDC configuration through SNMP
WS5000.(Cfg).Telnet> set kdcconfig disable
Setting KDC configuration rights...
Status : Success.
Configuration Access restriction details:
Telnet access (CLI)
System access via SNMP
KDC configuration over remote console
KDC configuration through SNMP
WS5000.(Cfg).Telnet>
Description
: Enable.
: Enable.
: Enable.
: Enable.
: Enable.
: Enable.
: Disable.
: Enable.